欧美性猛少妇XXXXX免费_新版天堂资源中文8在线_岛国无码av不卡一区二区_真人性囗交69视频

Computer Double Line Down Knife Type Paper Slitting Machine RRLB-4SB/5SB/6SB
  • Computer Double Line Down Knife Type Paper Slitting Machine RRLB-4SB/5SB/6SB
  • Computer Double Line Down Knife Type Paper Slitting Machine RRLB-4SB/5SB/6SB
0 1

Computer Double Line Down Knife Type Paper Slitting Machine RRLB-4SB/5SB/6SB

Cuttingwithlowerknifecaneffectivelyimprovetheroughedgeoftheboardprintingsurface;Electricallypoweredpaperedgesuctionnozzledevice(computersetup).

Product parameters


The main function of this machine is cutting and creasing corrugated cardboard.


The machine structure consists of two sets of wire crimping devices and one set of cutting system.


The maximum number of cutting sheets is four-open (five cutter wheels, eight lines for two sets of crimping wheels).


Five openings (six cutter wheels, ten threads for two sets of crimping wheels).


Six openings (seven cutter wheels, twelve thread rollers count twelve threads).


Both the cutter wheel seat and the wire wheel seat use precision linear bearings.


It adopts single-knife lower-knife design with a blade diameter of 270 mm, and the upper pressing device adopts a brush wheel.


The minimum cutting size is 120 mm.


The use of lower-knife cutting can effectively improve the problem of burrs on the printed surface of cardboard.


Each knife adopts independent electric motor, and the feed amount can be adjusted independently.


It adopts progressive feed, which can be set according to the thickness of the cardboard (signal needs to be sent from the tube management system).


Each knife has an independent blade sharpener and an oil filling system. The time or length of the automatic sharpening can be set by the computer. Manual sharpening can also be used to ensure the cardboard cuts are smooth and neat.


The outer diameter of the capstan is 224 mm.


The minimum crimp size can be 0 mm.


The height of the lower pressing wheel is not adjustable. The upper pressing wheel is controlled by a pneumatic cylinder, and it is also equipped with a depth control system.


The cutting and crimping dimensions are adjusted by an electric motor, and the size adjustment is completed within 1 to 13 seconds.


A maximum of 999 sets of orders can be entered, and any set of orders can be output first according to actual needs.


The machine can be moved 75 mm to the left and right to suit the paper edge offset.


With electric paper edge suction nozzle device (computer setting).


The cutter wheel uses A.C. motor + inverter. The same type of motor is used for the wire wheel and the double-sided machine, and both can be synchronized with the double-sided machine.


When using two wires to replace the order, it is not necessary to cut the cardboard and stop the machine.


Product parameters


The main function of this machine is cutting and creasing corrugated cardboard.


The machine structure consists of two sets of wire crimping devices and one set of cutting system.


The maximum number of cutting sheets is four-open (five cutter wheels, eight lines for two sets of crimping wheels).


Five openings (six cutter wheels, ten threads for two sets of crimping wheels).


Six openings (seven cutter wheels, twelve thread rollers count twelve threads).


Both the cutter wheel seat and the wire wheel seat use precision linear bearings.


It adopts single-knife lower-knife design with a blade diameter of 270 mm, and the upper pressing device adopts a brush wheel.


The minimum cutting size is 120 mm.


The use of lower-knife cutting can effectively improve the problem of burrs on the printed surface of cardboard.


Each knife adopts independent electric motor, and the feed amount can be adjusted independently.


It adopts progressive feed, which can be set according to the thickness of the cardboard (signal needs to be sent from the tube management system).


Each knife has an independent blade sharpener and an oil filling system. The time or length of the automatic sharpening can be set by the computer. Manual sharpening can also be used to ensure the cardboard cuts are smooth and neat.


The outer diameter of the capstan is 224 mm.


The minimum crimp size can be 0 mm.


The height of the lower pressing wheel is not adjustable. The upper pressing wheel is controlled by a pneumatic cylinder, and it is also equipped with a depth control system.


The cutting and crimping dimensions are adjusted by an electric motor, and the size adjustment is completed within 1 to 13 seconds.


A maximum of 999 sets of orders can be entered, and any set of orders can be output first according to actual needs.


The machine can be moved 75 mm to the left and right to suit the paper edge offset.


With electric paper edge suction nozzle device (computer setting).


The cutter wheel uses A.C. motor + inverter. The same type of motor is used for the wire wheel and the double-sided machine, and both can be synchronized with the double-sided machine.


When using two wires to replace the order, it is not necessary to cut the cardboard and stop the machine.


无码国产精品一区二区色情八戒 | 午夜精品白在线观看 | 999色色人妻门999 | 精品无码久久久久久久久国产软件 | 91人人澡人人妻 | 少妇被又大又粗猛烈进出视频 | 18黄色视频网站 | 欧美一级一级一级一级一级一级一级A | 6080yyy午夜理论片无码一区二区 | 无码精品人妻一二三区红粉影视 | A片丰满少妇A片在线播放 | 免费观看黄色视频网络 | 性一交一伦一片A片在线观看 | 国产美女自慰黄网站2020不卡 | 免费看一级一级人妻片 | 欧美性生交A片免费看 | 强奸乱伦色眯眯免费小视频大全 | 一夲道无码专区av无码A片 | 一级做a爰片久久毛片A片 9 1? | 粉嫩AV无码一区二区三区水牛 | 在线成人免费视频w | 好大好爽要受不了了视频 | 欧美激情国产精品 | WWW国产精品内射熟女 | 午夜亚洲国产理论影院 | 内射无码无套极品视频1000部 | 成人一区二区在线 | 成人做爰黄级爽爽视频直播网 | 91精品国产乱码久久久久 | 親子倫一級黃片美日韓精品 | 秘 亚洲国产精品成人网站 亚洲国精一区二区无码蜜桃 | 中文字幕免费在线看 | 久久成人无码国产免费播放 | 女人被男人吃奶到高潮 | 吃奶揉胸A片麻豆 | 国产成人在线视频免费观看 | 国产精品秘 麻豆 | 黄.comaaaaaaaa| 国产乱国产乱老熟300部视频 | www.eeuss| 久久久久久AV无码免费看大片博雅 |